M9703A Front Panel Features; Front Panel Connectors - Keysight M9703A Startup Manual

Step 4: Install the Module

M9703A Front Panel Features

Front Panel Connectors

Connector Type
SMA female
IN (1 - 8)
MCX female
REF IN
SMA female
CLK IN
MCX female
TRG 1, 2, 3
TRG OUT MCX female
DPU JTAG USB Mini
CTR JTAG USB Mini
I/O 1, 2 MCX female
Digitizer can usually work with signals present at the external reference and
clock inputs (REF IN and CLK IN). However, to ensure the best performance, or if
the calibration is found to be unreliable, it is recommended to remove such
signals when working with internal clock.
16
Description
The analog signal inputs, which are DC-coupled and 50 Ω terminated. The input
full scale ranges are selectable, either 1 V or 2 V.
Recommended maximum operating voltage is ±3 V (1V FSR) or ±4.3 V (2V FSR).
Clamp at ±3.6 V (1V FSR) or ±6.3 V (2V FSR).
Absolute maximum DC voltage rating ±4.6 V (1V FSR) or ±5 V (2V FSR).
Frequency range is DC to 650 MHz (-F05) or DC to 2 GHz (-F10).
This external reference clock input is AC coupled and 50 Ω terminated.
It can accept a 100 MHz signal up to 3 dBm (0.3 V rms / 50 Ω).
This external clock source is AC-coupled, with 50 Ω termination, and can accept
signals up to +15 dBm (1.26 V rms / 50 Ω).
Frequency = 1.8 to 2 GHz with -SR1 option or 1.8 to 3.2 GHz with -SR2 option.
These external trigger inputs are DC-coupled, 50 Ω terminated. The trigger
level range is ±5 V.
Trigger Out signal. User selectable from several functions.
JTAG FPGA debugging interface. Used in conjunction with the U5340A FDK.
Not currently supported.
User configurable Input / Output signal. 3.3 V CMOS and TTL compatible.
Keysight M9703A Startup Guide