Keysight M9703A Startup Manual page 21

Axie high-speed digitizer 8 channels, 12-bit, up to 3.2 gs/s dc up to 2 ghz bandwidth

Hide thumbs Also See for M9703A:

Table of Contents

12. Verify that:

If a Problem is Found

1. Verify that you have made all configuration settings as shown above.

2. Verify that the RF generator is ON and producing the desired signals at the end

of the BNC cables. This can be done with an oscilloscope.

3. Verify that the problem is reproducible.

4. Contact Keysight technical support for assistance. Contact details may be

found at: www.keysight.com/find/assist.

Keysight M9703A Startup Guide

the waveform shown is stable from one acquisition to the next

the period of the signal is 1.6 divisions (10 ns)

the pk-pk amplitude is 8 ± 0.6 divisions

the channel status LED is white (triggered)

Step 5: Verify Operation of the M9703A Module

Table of Contents