Keysight M9703A Startup Manual page 20

Step 5: Verify Operation of the M9703A Module
5. Select
6. Select
7. Ensure that
name.
8. Select
9. Make the following configurations:
10. Open the
11. Select the
shown below.
20
mode.
persistence mode.
is enabled by clicking on the tick box under the instrument
Channel Combination mode, and
Input Full Scale : 2V
Coupling : DC 50
Nbr of Samples : 200
control window and make the following configuration :
Module: Module 1
Trigger Source: Ch1 (INPUT 1)
Trigger Coupling: DC
Acquisition mode and the Waveform Display should be as
Offset : 0.000000 V
Nbr of Segments : 1
Sampling Frequency: 3200 MS/s
Trigger Class: Edge
Trigger Level : 0 mV
Trigger Slope: Positive
Keysight M9703A Startup Guide