Advertisement
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether they are the end user or supervising
personnel on proper usage of the equipment.
It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX equipment be used
properly to avoid injury.
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment, or any other type of adjustment mechanisms to a
comfortable start position. Make certain that the adjusting mechanism is fully engaged to prevent unintentional movement and to avoid
injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.
INSTALLATION
1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a stable base and properly leveled.
2. SECURING EQUIPMENT: Manufacturer requires that all stationary Matrix Connexus equipment be secured to the floor to stabilize equipment
and eliminate rocking or tipping over. This must be performed by a licensed contractor.
Floor anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.
Wall anchor points must be able to withstand 500 lbs. (2.2 kN) pull-out force.
Please contact your Matrix Representative for Connexus anchoring guidelines.
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is specifically
regulated by the owner. It is up to the owner to determine who is allowed access to this training
equipment. The owner should consider a user's: degree of reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its intended purpose
in accordance with the instructions provided by the manufacturer.
This equipment is for indoor use only. This training equipment is a Class S product (designed
for use in a commercial environment such as a fitness facility). This training equipment is in
compliance with EN ISO 20957-1.
WARNING
DO NOT USE equipment if
not properly secured to floor.
Manufacturer requires that this
equipment be secured to the
floor to stabilize and eliminate
rocking or tipping over.
Use a licensed contractor.
WARNING
DEATH OR SERIOUS INJURY CAN
OCCUR ON THIS EQUIPMENT. FOLLOW
THESE PRECAUTIONS TO AVOID
INJURY!
1. Keep children under the age of 14
away from this strength training
equipment. Teenagers must be
supervised at all times while using
this equipment.
2. This equipment is not intended for
use by persons with reduced
physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or
instruction concerning use of the
equipment by a person responsible
for their safety.
3. All warnings and instructions
should be read and proper
instruction obtained prior to use.
Use this equipment for its intended
purpose ONLY.
4. Inspect the machine before use. DO
NOT use machine if it appears
damaged or inoperable.
5. Do not exceed weight capacity of
this equipment.
6. Where applicable, use retention
devices to retain weight discs.
7. Injuries to health may result from
incorrect or excessive training.
Cease exercise if you feel faint or
dizzy. Obtain a medical exam before
beginning an exercise program.
8. Keep body, clothing, hair, and
fitness accessories free and clear
of all moving parts.
9. Horizontal adjustable bars are
heavy. Support bars from center of
mass when detaching and
reattaching bar to frame structure.
Ensure bar is fully engaged with
frame before use.
10. If optional heavy bag is used, do
not support body weight from the
bag. Do not add additional weight
to bag.
11. When adjusting any adjustable
mechanism (stop position, seat
position, pad location, range of
motion limiter, pulley carriage, or
any other type), make certain that
the adjustable mechanism is fully
engaged prior to use to prevent
unintended motion.
12. Manufacturer requires that this
equipment be secured to the floor
to stabilize and eliminate rocking
or tipping over. Use a licensed
contractor.
13. DO NOT REMOVE THIS LABEL.
REPLACE IF DAMAGED OR
ILLEGIBLE.
Group Functional Trainer
3
Advertisement
