Related Manuals for Matrix C7xe
Summary of Contents for Matrix C7xe
- Page 1 C7xe CLIMBMILL OWNER’S MANUAL MX_12_C3x_5x_7xe_OM_Rev1_1.indd 1 10/30/12 5:00 PM...
-
Page 2: Important Precautions
IMPORTANT PRECAUTIONS SAVE THESE INSTRUCTIONS When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this product. It is the responsibility of the owner to ensure that all users of this product are adequately informed of all warnings and precautions. - Page 3 DANGER WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK: • Disconnect all power before servicing or moving the equipment. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE) Always unplug the unit from the electrical outlet immediately after using, before cleaning, performing maintenance and putting on or •...
-
Page 4: Electrical Requirements
Matrix limited digital TV. All Matrix 3x, 5x and 7xe 110 V Climbmills require the use of a 100-125 V, 60 Hz and a 15 A “Dedicated Circuit”, with a non-looped warranty. (isolated) neutral/ground for power. This outlet should be a NEMA 5-15R and have the same configuration as the plug. No adapter should be used with this product. -
Page 5: Basic Operation
DANGER BASIC OPERATION Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. -
Page 6: Height Requirements
LOCATION OF THE UNIT WARNING Place the unit on a level and stable surface away from direct sunlight. The intense UV light can cause discoloration on the plastics. Locate your unit in an area with cool temperatures and low humidity. Please Never operate product if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in leave a clear zone behind the unit that is at least 24”... -
Page 7: Troubleshooting And Maintenance
WIRELESS HEART RATE RECEIVER TROUBLESHOOTING When used in conjunction with a wireless chest transmitter, your heart rate can be transmitted wirelessly to the unit and displayed on the console. & MAINTENANCE Prior to wearing the wireless chest transmitter on your chest, moisten the two rubber electrodes with water. Center the chest strap just below the breast or pectoral muscles, directly over your sternum, with the logo facing out. -
Page 8: Recommended Cleaning Tips
CHECK FOR DAMAGED PARTS QUARTERLY Notes/comments DO NOT use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Matrix Fitness. • Check pedal motion and stability to ensure the Climbmill does not rock or wobble. - Page 9 CONSOLE SERIAL NUMBER: FRAME SERIAL NUMBER: SERIAL # PLACEMENT MATRIX MODEL NAME: » Refer to the SERIAL NUMBER and MODEL NAME when calling for service. » The console serial number can be found in the Manager Mode or Engineering Mode.
-
Page 10: Required Tools For Assembly
INCLUDED FASTENERS FASTENERS SKETCH DESCRIPTION QUANTITY PACKAGE COLOR SOCKET HEAD BOLT(M8x25L) BLACK SOCKET HEAD BOLT(M8x20L) BLUE SOCKET HEAD BOLT(M8x35L) GREEN SOCKET HEAD BOLT(M8x16L) GREEN SOCKET HEAD BOLT(M8x16L) BLUE CURVED WASHER BLUE FLAT WASHER BLUE FLAT WASHER GREEN REQUIRED TOOLS FOR ASSEMBLY 6mm ALLEN WRENCH 5mm ALLEN WRENCH MX_12_C3x_5x_7xe_OM_Rev1_1.indd 18-19... -
Page 11: Assembly Step
ASSEMBLY STEP 1 ASSEMBLY STEP 2 BLACK HARDWARE BAG CONTENTS : BLUE & GREEN HARDWARE BAG CONTENTS SOCKET HEAD BOLT(M8x25L) SOCKET HEAD BOLT(M8x20L) BLUE BLACK UPPER HANDLEBAR SOCKET HEAD BOLT(M8x16L) GREEN GREEN BAG SOCKET HEAD BOLT(M8x35L) GREEN BOTTLE HOLDER CURVED WASHER BLUE Open BLACK HARDWARE BAG FLAT WASHER... - Page 12 ASSEMBLY STEP 3 C5x and C7xe ASSEMBLY STEP 4 Connect the wires from the frame to the CONTENTS ARE PRE-ATTACHED: Base Step. SOCKET HEAD BOLT(M5x12L) Lift the Base Step over the caster wheels. Push down firmly on both sides until it seats firmly.
- Page 13 C3x ASSEMBLY STEP 4 CLIMBMILL OPERATION To attach end caps, slide (1) over (2) and then slide (3) into (4). C3X ASSEMBLY COMPLETE! END CAPS LEVELERS MX_12_C3x_5x_7xe_OM_Rev1_1.indd 24-25 10/30/12 5:00 PM...
-
Page 14: Console Description
CONSOLE DESCRIPTION: 7XE CONSOLE: The Matrix machine is inspected before it is packaged. It is shipped in two pieces: the base These sections allow users to manipulate default settings for the machines. Manager Mode may be accessed by pressing ENTER, 1, 0, 0, 1, Enter on the keypad. - Page 15 3X CONSOLE DESCRIPTION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) WORKOUT KEYS: Simple program view and selection buttons. B) GO: One Touch Start. C) ENTER: To confirm each program setting. D) UP/DOWN TIME: Use to adjust workout time.
- Page 16 5X CONSOLE DESCRIPTION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) WORKOUT KEYS: Simple program view and selection buttons. B) GO: One Touch Start. C) ENTER: To confirm each program setting. D) UP/DOWN TIME: Easy information and time adjustment.
- Page 17 7XE CONSOLE DESCRIPTION The 7xe has a fully integrated touch screen display. All information required for workouts is explained on screen. Exploration of the interface is highly encouraged. The information explaining how to program for various workouts will give an explanation about the contents of each screen on the 7xe.
-
Page 18: Workout Descriptions
Press the GO button and the machine will enter into a manual Your Matrix machine offers a variety of level-based workouts to challenge users of all fitness levels. The following information will There are 20 workout profiles in random mode. Profile will mode of operation. - Page 19 Calorie Training is a target-based workout that is designed to Goal Training is a goal-based workout that is designed to help Your Matrix machine offers a heart rate control workout This program allows you to vary your cadence or SPM and the help users burn a target number of calories.
- Page 20 WORKOUT DESCRIPTIONS FITNESS TESTS SUBMAXIMAL FAT BURN WORKOUT OPERATION FITNESS RATING NORMS (VO 2 MAX) This test measures cardiovascular fitness and provides an Fat burn is a level-based workout that is designed to help 20-29 30-39 40-49 50-59 estimated Sub-maximal VO2max result. This assessment users burn fat through various resistance changes.
- Page 21 AVAILABLE ON 7XE CONSOLES NIKE + OPERATION REQUIREMENTS Nike Plus – compatible iPod or iPhone (See www.apple.com/nikeplus for more information). READY Before syncing your Apple device to your computer, you must first create a free Nike Plus account at Connect your Nike Plus-compatible device to the built-in Made for iPod connector on Nike + iPod compatible www.nikerunning.com and download the latest iTunes software (www.apple.com/itunes).
-
Page 22: Product Specifications
PRODUCT SPECIFICATIONS ALL CLIMBMILL WATTS TABLE 60 KG. USER (132 LBS) MODEL C-5x/7x C-3x MODEL TYPE C7xe CLIMBMILL C5x CLIMBMILL C3x CLIMBMILL Console Model HURESAC-7XE-04-C C-5X-02-C C-3X-C FRAME PART # C-5X/7X-02-F C-3X-F WEIGHT (KG.) CONSOLE PART # HURESAC-7XE-04-C C-5X-02-C C-3X-C... - Page 23 Z23x3 Z24x3 Z24x2 Z23x3 Z22x2 Z24x3 Z24x2 Z22x2 Z25x2 Z31x2 Z31x4 Z24x4 Z25x2 Z31x2 Z21x4 AG22 Z31x4 B72x3 Z24x4 Z31x2 Z21x4 AG22 AG15 B72x3 Z31x2 AG15 B72x4 B72x4 Q25x2 Z31x2 Z32x2 Q24x3 B56x4 B72x4 B72x4 AB13 P35x2 Q25x2 Z31x2 B45x3 B72x2 Z32x2 Q24x3...
- Page 24 MX_12_C3x_5x_7xe_OM_Rev1_1.indd 46-47 10/30/12 5:01 PM...
- Page 25 Matrix Fitness 1-866-693-4863 1600 Landmark Drive, www.matrixfitness.com Cottage Grove, WI 53527 Matrix Climbmill 1.1 | © 2012 Matrix Fitness MX_12_C3x_5x_7xe_OM_Rev1_1.indd 48 10/30/12 5:01 PM...
Need help?
Do you have a question about the C7xe and is the answer not in the manual?
Questions and answers