Advertisement
Quick Links
Advertisement
Related Manuals for Matrix CONNEXUS Series
Summary of Contents for Matrix CONNEXUS Series
- Page 1 GFTFS GFTEXP GFTMB GFTCB CONNEXUS GFTWM GFTLM GFTVRT GFTHB...
- Page 2 ENGLISH LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE LANGUAGE...
-
Page 3: Important Safety Information
THESE PRECAUTIONS TO AVOID INJURY! Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX equipment be used 1. Keep children under the age of 14 away from this strength training properly to avoid injury. -
Page 4: Maintenance
248.5” x 177.5” of wall-mounted footprint * Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs. - Page 5 UNPACKING CAUTION Thank you for purchasing a MATRIX Fitness product. It is inspected before it is To avoid injury to yourself and prevent damage to the frame components, be sure packaged. It is shipped in multiple pieces to facilitate the compact packaging of the to have proper assistance removing the frame pieces from this box.
-
Page 6: Free Standing
GFTFS Free Standing B x12 A x8 A x28 SQ FT D x4 TOTAL TRAINING AREA 8.3 × 8.2 (27.2 × 26.9 C x40 FREE-STANDING TRAINING AREA DIMENSIONS (8.9 WIDE PATH 2.9 × 2.8 (9.5 × 9.2 A x8 B x8 C x8 FREE AREA WIDE PATH... - Page 7 Free Standing GFTFS Step 1 of 3 Z05x2 Z27x2 Z27x2 Z05x2 Z05x2 Z27x2 Z05x2 Z27x2 NOTE: Assemble laying down for step 1 Do not completely tighten hardware until final step Item Description Flat Washer (Φ10) Screw (M10x110L) Screw (M10x40L) Nut (M10)
- Page 8 Free Standing GFTFS Step 2 of 3 Z26x2 Z26x2 Z24x2 Z13x2 Z05x4 Z26x2 Z13x2 Z26x2 Z05x4 Z24x2 Z24x2 Z13x2 Z05x4 NOTE: Do not completely tighten hardware until final step Item Description Screw (M10x75L) Z13x2 Flat Washer (Φ10) Screw (M10x155L) Nut (M10) Z05x4 Z24x2...
- Page 9 Free Standing GFTFS Step 3 of 3 Z27x2 Z05x2 Z27x2 Z05x2 Z06x2 Z06x2 NOTE: Tighten hardware from steps 1–3 using the following Torque Values on page 6. Item Description Z25x2 Z05x2 Screw (M8x25L) Flat Washer (Φ10) Z25x2 Screw (M10x40L) Z05x2 Screw (M10x25L) Screw (M6x15L) Z06x2...
-
Page 10: Wall Mounted
GFTWM Wall Mounted A x6 A x16 SQ FT D x2 B x12 WALL-MOUNTED TRAINING AREA DIMENSIONS FRONT: 2.7 × 1.7 (9.2 (8.9 × 5.6 SIDES: (5.9 C x20 FREE AREA A x8 C x8 B x4 GFTWM Torque Values M10 Torque to 77 Nm/57 ft-lb M10 Torque to 40 Nm/30 ft-lb Torque to 39 Nm/29 ft-lb... - Page 11 Wall Mounted GFTWM Step 1 of 3 Z05x2 Z27x2 Z05x2 Z27x2 Item Description Flat Washer (Φ10) Screw (M10x110L) Screw (M10x40L) Nut (M10) NOTE: Assemble laying down for step 1 Do not completely tighten hardware until final step...
- Page 12 Wall Mounted GFTWM Step 2 of 3 Z26x2 Z13x2 Z05x2 Z12x2 Z28x2 Z13x2 Z05x4 Z24x2 Z13x2 Z05x4 Z24x2 Item Description Screw (M10x75L) Flat Washer (Φ10) Screw (M10x155L) Nut (M10) Screw (M10x95L) Screw (M10x90L) NOTE: Do not completely tighten hardware until final step Z13x2 Z13x2 Z05x4...
- Page 13 Wall Mounted GFTWM Step 3 of 3 Z27x2 Z05x2 Z27x2 Z05x2 Item Description Screw (M8x25L) Flat Washer (Φ10) Screw (M10x40L) Screw (M10x25L) Screw (M6x15L) NOTE: Tighten hardware from steps 1–3 using the following Torque Values on page 10. Z06x4 Z05x2 Z05x2 Z06x2 Z06x2...
- Page 14 GFTEXP Expansion SQ FT WALL-MOUNTED TRAINING AREA DIMENSIONS (EACH) FRONT: 2.4 × 1.7 (9.2 (8 × 5.6 SIDES: (5.9 FREE AREA...
- Page 15 Blue represents Expansion GFTEXP existing wall-mount Step 1 of 5 NOTE: Starting as wall-mounted unit GFTWM Do not completely tighten hardware until final step...
- Page 16 Expansion GFTEXP Step 2 of 5 NOTE: Do not completely tighten hardware until final step Remove existing wall-mounted upright Replace existing wall-mounted upright with expansion kit upright...
- Page 17 Expansion GFTEXP Step 3 of 5 Z05x2 Z27x2 Item Description Flat Washer (Φ10) Screw (M10x110L) Screw (M10x40L) Nut (M10) NOTE: Do not completely tighten hardware until final step Assembly laying down for step 3. Z05x2 Z27x2 Existing wall-mounted upright...
- Page 18 Expansion GFTEXP Step 4 of 5 Z05x4 Z13x2 Item Description Screw (M10x75L) Flat Washer (Φ10) Screw (M10x155L) Nut (M10) Z12x2 Screw (M10x95L) Z24x2 Z13x2 NOTE: Z24x2 Do not completely tighten hardware until final step Z05x4 Z24x2 Z26x2 Z05x4 Z13x2 Z05x4 Z24x2 Z13x2 Existing wall-mounted upright...
- Page 19 Expansion GFTEXP Step 5 of 5 Item Description Screw (M8x25L) Flat Washer (Φ10) Screw (M10x40L) Z27x2 Screw (M10x25L) Screw (M10x15L) Z05x2 NOTE: Tighten hardware from steps 1–3 using the following Torque Values on page 10. Z06x4 Z06x2 Z05x2 Z25x2 Z05x2 Z25x2 Z06x2...
- Page 20 GFTLM Landmine Attachment Item Description Screw (M6x4L) NOTE: Tighten hardware from step 3 using the Torque Value following 17 Nm / 147 in-lb Item Description Z06x2 Screw (M8x25L) Screw (M8x16L) NOTE: Tighten hardware from step 2 using the Torque Value following 39 Nm / 29 ft-lb Z15x3...
- Page 21 GFTMB Med Ball Target Item Description Hex Screw (M10x20L) Z20x2 NOTE: Tighten hardware from step 1 using Torque Value the following 40 Nm / 30 ft-lb Z20x2...
-
Page 22: Vertical Extension
GFTVRT Vertical Extension For use with the Free Standing unit only. Item Description Flat Washer (Φ10) Screw (M10x35L) NOTES: Start with the top fastener, working down, tightening each bolt two or three revolutions at a time. Repeat process from top to bottom until all hardware is fully SLIDE ROM DOWN threaded. - Page 23 GFTCB Magnetic Chalkboard Item Description Item Description Flat Washer (Φ10) Hex Screw (M10x20L) Screw (M10x155L) Nut (M10) NOTE: NOTE: Tighten hardware from step 2 using Tighten hardware from step 1 using Torque Value the following Torque Value the following 40 Nm / 30 ft-lb 77 Nm / 57 ft-lb Z20x2 Z13x2...
- Page 24 GFTHB Heavy Bag Heavy included...
- Page 26 CONNEXUS - GFTFS / GFTWM / GFTEXP / GFTLM / GFTMB / GFTVRT / GFTCB / GFTHB Part # XXXXXXXXXX © 2015 Johnson Health Tech Rev 1.2...