Valet/ Service Mode - Ultra Start 3295 SERIES Owner's Manual

PAGE 21
PROGRAMMING
VALET / EMERGENCY OVERRIDE MODE
THIS FEATURE IS USED TO DEACTIVATE THE REMOTE START AND ALARM (ALARM
MODELS ONLY) IF THE VEHICLE REQUIRES SERVICING OR IF THE REMOTE IS LOST OR
DAMAGED WHILE THE ALARM IS IN ARMED STATE.
ACTIVATING VALET MODE/ EMERGENCY OVERRIDE.
ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON
POSITION.
(LEAVE IN THE ON POSITION)
WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15
SECONDS*
*DEPENDS ON "VALET OPTIONS" PROGRAM OPTION.
THE HORN WILL CHIRP 5 TIMES AS CONFIRMATION THAT THE
SYSTEM HAS ENTERED VALET/ EMERGENCY OVERRIDE MODE.
THE LCD WILL DISPLAY VALET AFTER A FUNCTION IS PREFORMED.
THE LEDS ON THE ANTENNA WILL TURN ON SOLID.
ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON
POSITION.
(LEAVE IN THE ON POSITION)
WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15
SECONDS*
*DEPENDS ON "VALET OPTIONS" PROGRAM OPTION.
THE HORN WILL CHIRP 2 TIMES AS CONFIRMATION THAT THE
SYSTEM HAS EXITED VALET/
THE LEDS ON THE ANTENNA WILL TURN OFF.
EMERGENCY OVERRIDE MODE.
95 SERIES
OWNERS MANUAL