Entering Program Mode - Ultra Start 35 Series Install Manual

2-way remote starters
Hide thumbs Also See for 35 Series:
Table of Contents

Advertisement

INSTALL MANUAL
PAGE 14

Entering Program Mode

Ignition 3x
Press and
On/Off
Release the
On/Off On
Program Button
1) With the ignition in the OFF position, turn the ignition key from "Off" to "On" 3
times, ON-OFF-ON-OFF-ON within three seconds.
NOTE: Leave the key in the ON position
2) Press and release the Program Button. The park lights will flash and the horn
(optional) will honk to confirm entering program mode.
3) Select desired Program Menu (See below). The park lights will flash and
horn (optional) will honk to confirm the selected menu.
4) Select Programmable Setting:
a) Press and release the Program Button the correct number of times to
select the desired Program Setting. The park lights and LEDs will flash
and the horn (optional) will honk to indicate the Program Setting that has
been selected. For example: 1 flash/honk= Program Setting 1;
b) Press and Hold the Program Button until the park lights flash and the
horn(optional) honks to confirm the desired setting. For example: 1 flash/
honk= Setting 1; 2 flashes/honks= Setting 2; 3 flashes/honks= Setting 3.
c) Turning the ignition key to the "Off" position or 30 seconds of no activity
will exit Program Mode. This will be confirmed with a light flash and a
long horn (optional) honk. The Program Menu may be changed at any
time by pressing the transmitter button (below), this will allow the
installer to jump from one menu, then quickly jump to another menu and
change another setting without re-entering Program Mode.
Program Menus
Menu 1: User Settings (
This program menu is for the adjustments for the user and door lock options.
Menu 2: Additional Settings (
This program menu is for additional settings.
Menu 3: Starter Settings (
This program menu is for various remote car starter applications.
Menu 4: Tach Settings ( Button)
This program menu is for tach signal adjustments.
For Menu 1,
For Menu 2,
press the
press the
button
2 flashes/honks= Program Setting 2; etc...
Button)
Button)
Button)
REMOTE VEHICLE STARTER
For Menu 3,
press the
button
button
For Menu 4,
press the
button
Page 16
Page 17
Page 18-19
Page 20

Advertisement

Table of Contents
loading

Table of Contents