User Options - Ultra Start 3295 SERIES Owner's Manual

95 SERIES
OWNERS MANUAL
M-1234
PROGRAM
PRESS START TO GO TO RUN TIME ADJUSTMENT
ON ON
TIMER RUN 15
PROGRAM PROGRAM
M-1234
PROGRAM
PRESS TRUNK TO GO TO TEMP ADJUSTMENT
ON ON
TIMER TEMP 1
PROGRAM PROGRAM
*TEMP MODE IS TURNED ON OR OFF BY HOLDING THE LOCK AND START BUTTONS FOR 5 SECONDS.
THE TEMP SENSOR MUST BE INSTALLED FOR THIS FEATURE TO OPERATE.
RUN TIME ADJUSTMENT
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
"PROGRAM" & "M-1234". PRESS START TO CONTINUE.
RUN TIME ADJUSTMENT
PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS STATUS TO EXIT.
TEMP START ADJUSTMENT
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
"PROGRAM" & "M-1234". PRESS TRUNK TO CONTINUE.
TEMP ADJUSTMENT
PRESS THE UNLOCK OR START BUTTONS TO SCROLL
THROUGH THE SETTINGS.
TEMP 1- THE SYSTEM WILL START AT 0C / 32F
TEMP 2- THE SYSTEM WILL START AT -5C / 23F
TEMP 3- THE SYSTEM WILL START AT -15C / 5F
TEMP 4- THE SYSTEM WILL START AT -25C / 13F
PAGE 20
PROGRAMMING