Remote Start Functions - Ultra Start 3295 SERIES Owner's Manual

95 SERIES
OWNERS MANUAL
1
P 12:45
1
START
1
RUN 15
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED.
PLEASE SEE FAULT CODE SECTION OF MANUAL FOR MORE INFORMATION.
ENTER THE VEHICLE THEN INSERT THE KEY INTO THE IGNITION CYLINDER.
TURN THE KEY FORWARD TO THE ON POSITION. (TYPICALLY 2 POSITIONS)
STEP ON THE BRAKE AND THE REMOTE STARTER WILL TURN OFF AND THE
VEHICLE WILL STAY RUNNING.
*IF THE VEHICLE SHUTS OF THE KEY WAS NOT TURN FORWARD TO THE IGNITION/RUN
POSITION.
WARNING- DO NOT TURN THE KEY TO THE START POSITION WHILE THE VEHICLE IS
RUNNING BY THE REMOTE START.
PRESS AND HOLD THE START BUTTON ON THE REMOTE FOR
3 SECONDS UNTIL THE REMOTE BEEPS THEN RELEASE. THE
PARK LIGHTS WILL FLASH. THE HORN (OPTIONAL) WILL
CHIRP 1 TIME.
THE REMOTE WILL BEEP AND "START" WILL BE DISPLAYED
ON THE LCD AFTER THE VEHICLE HAS STARTED THE RUN .
TIME WILL BE DISPLAYED AND REMOTE WILL PLAY THE
START TUNE.
THE HORN (OPTIONAL) WILL CHIRP AND THE PARK LIGHTS
WILL TURN ON AND STAY ON FOR THE PROGRAMMED
RUNTIME. THE REMOTE WILL FLASH THE RUN TIME THEN
TURN OFF.
PRESS & RELEASE THE TRUNK BUTTON TO CHECK THE RUN TIME
SYSTEM FUNCTIONS
PAGE 8
.