Ultra Start 3295 SERIES Owner's Manual page 7

95 SERIES
OWNERS MANUAL
DISPLAY BUTTON PRESS
1
LOCK
1
UNLOCK
1
AUX 1
1
AUX 2
THE AUXILIARY OUTPUTS ARE USED TO ACTIVATE ADDITIONAL FUNCTIONS SUCH AS WINDOW
ROLL-UP AND GAS CAP RELEASE. THESE FUNCTIONS MAY REQUIRE ADDITIONAL PARTS AND
LABOUR. SEE DEALER FOR MORE INFORMATION.
1
LOCK
1
SENOFF
1
DISARM
STATUS
(BUTTON 5)
1
12:25PM
AUDIBLE
PRESS AND RELEASE THE
LOCK AND UNLOCK BUTTONS
AT THE SAME TIME.
PRESS AND HOLD THE
UNLOCK AND TRUNK
BUTTONS FOR 5 SECONDS
PRESS AND HOLD THE
UNLOCK AND STATUS
BUTTONS FOR 5 SECONDS
LOCK- PRESS AND RELEASE
WITHIN 3 SECONDS
KEY- PRESS AND RELEASE
PRESS AND RELEASE
QUICK VIEW CHART
FUNCTION
1 BEEP IF THE DOORS ARE UNLOCKED/ SYSTEM DISARMED * THE DOORS
PAUSE
WILL LOCK WITH NO CHIRPS. IF THE DOORS ARE LOCKED/ SYSTEM
1 BEEP
ARMED* THE DOORS WILL UNLOCK WITH NO CHIRPS.
OR
1 BEEP
*ALARM MODELS ONLY.
PAUSE
2 BEEPS
1 BEEP ACTIVATES THE AUXILIARY #1 OUTPUT.
PAUSE
THE OUTPUT WILL STAY ACTIVE FOR 4 SECONDS.
TONE
1 BEEP ACTIVATES THE AUXILIARY #2 OUTPUT.
PAUSE
THE OUTPUT WILL STAY ACTIVE FOR 4 SECONDS
TONE
NOTE: THIS FEATURE MUST BE SET BY INSTALLER - REFER TO INSTALL GUIDE
1 BEEP SHOCK SENSOR BYPASS
PAUSE
THE SHOCK SENSOR WILL BE DISABLED UNTIL THE NEXT TIME THAT
TONE
THE SYSTEM IS DISARMED THEN REARMED
*ALARM MODELS ONLY
1 BEEP STATUS UPDATE
PAUSE
THIS FEATURE DISPLAYS THE CURRENT STATUS OF THE SYSTEM, THE
1 BEEP
TEMPERATURE THEN THE TIME.
* IF NO TEMP SENSOR IS INSTALLED OR IF THE SENSOR HAS AN ERROR
THE TEMP DISPLAYED WILL BE -121 C.
PAGE 6