Quick View Operations Chart; Service Mode/ Emergency Override - Ultra Start 3295Series Installation Manual

PAGE 27
QUICK VIEW OPERATIONS
SYSTEM PROGRAMMING - Menu 1
SYSTEM PROGRAMMING - Menu 1
QUICK VIEW OPERATION CHART
BUTTON
SERVICE MODE / EMERGENCY OVERRIDE
TO AVOID SERIOUS INJURY, this remote start system must be set into Service Mode
before any under hood servicing is started. Service Mode will prevent the vehicle from
starting while the vehicle is being serviced. It is the sole responsibility of the vehicle's
owner to place the system into Service Mode. The manufacture accepts no
responsibility for accidental starting of the vehicle while the vehicle is being serviced.
ACTIVATING / DEACTIVATING VALET MODE / EMERGENCY OVERRIDE
Turn the Ignition Key ON
(Leaving the key ON)
Press and hold the Valet switch for 8 to 15 seconds
(Time depends on "Valet Settings" Program Option)
5 CHIRPS = OFF
2 CHIRPS = ON
LENGTH OF PRESS
1 SECOND
3 SECONDS
1 SECOND (PANIC OR ALARM)
1 SECOND
1 SECOND (PANIC OR ALARM)
HOLD FOR 3 SECONDS
1 SECOND
1 SECOND WHEN RUNNING
3 SECONDS W/ REMOTE START
HOLD FOR 3 SECONDS
HOLD FOR 3 SECONDS
PRESS AND RELEASE
REMOTE START AND ALARM DEACTIVATED
REMOTE START AND ALARM ACTIVATED
CHIRPS /
SYSTEM OPERATION
FLASHES
1 LOCK / ARM ALARM
1 ACTIVATE PANIC
OFF ALARM/ PANIC OFF
UNLOCK / DISARM
2
OFF ALARM/ PANIC OFF
2 + 1
1 REMOTE START
1 EXTENDED RUNTIME
2
2
TRUNK RELEASE
1
5 LONG
STATUS STATUS CHECK ON 2WAY
95 SERIES
INSTALL MANUAL
SHUTDOWN