Page 1
Covers All 32xx and 33xx Series Remote Starters -The system must be placed into Service Mode before any service work is started on the vehicle. It is the sole responsibility of the vehicle owner to ensure that this is done. The manufacturer accepts no liability or responsibility for accidental starting of the vehicle.
Our limited lifetime warranty provides one of the best protection plans in the industry, giving both the consumer and the retailer confidence when they invest in an Ultra Start product. FCC Notice This device complies with Part 15 of the FCC rules.
OWNER’S GUIDE Page 4 Remote Star ter Functions Remote Starting 1.Press and release Button #3 on the remote transmitter. 1 2 3 2.The Park lights will flash and the horn (optional) will honk one time. 3. The remote will beep 3 times and the key icon will begin flashing. 4.When the vehicle has started, the system will flash the park lights four times then remain “On”...
2WAY REMOTE VEHICLE STARTER Manual transmission remote starters must be set into Reservation Mode before the remote starter will activate. There are two different ways to place the system into Reservation Mode. The activation type of Reservation Mode is determined when the system is installed.
OWNER’S GUIDE Page 6 Optional Features... Lock Doors 1.Press and release button #1 on the remote transmitter. The park lights will 1 2 3 flash, the horn (optional) will honk one time and the doors will lock. 3. The remote will beep once to confirm. The Lock icon will appear on the LCD display of the remote.
Page 7
2WAY REMOTE VEHICLE STARTER Cold Start Mode Cold Start Mode will start the vehicle at a user selectable start interval or temperature setting. The vehicle can be set to start once every 1, 2, 3 or 4 hours in Timer Mode or to start at 0,-5,-15 or -25 Celsius in Temperature Mode (LT Models Only) for a maximum 12 starts.
OWNER’S GUIDE Page 8 LCD DISPLAY STATUS CHECK MODE This feature is used to check the status of the alarm system or the remote starter. 1. To check the status press and release Button #4 on the remote transmitter. 2. The remote will display the icons of the active features on the LCD screen. STATUS ICONS These icons are located at the top of the LCD screen.
OWNER’S GUIDE Setting The Digital Clock To Enter Clock Adjust Mode Press and hold buttons #1 and #4 until the minute portion of the clock located on the LCD begins to flash To Adjust The Time of day To set the minute, press and release button #3 to increase the minute or press button #2 to decrease the minute.
OWNER’S GUIDE Page 10 Service Mode ATTENTION: TO AVOID SERIOUS INJURY, this remote start system must be set into Service Mode before any under hood servicing is started. Service Mode will prevent the vehicle from starting while the vehicle is being serviced. It is the sole responsibility of the vehicle’s owner to place the system into Service Mode.
2WAY REMOTE VEHICLE STARTER Diagnostics/ Diagnostics Chart If the remote starter does not activate when the start button is pressed the park lights will flash a diagnostic to indicate what shutdown input has been triggered. Example when the start button is pressed the park lights flash 3 times slowly. Looking at the chart below this would indicate that the system is in Service Mode.
OWNER’S GUIDE Page 12 Limited Lifetime Warranty The manufacturer warrants to the original purchaser of their remote starters and alarms, that the product shall be free from defects in material and workmanship. However, should this product be proven to be defective, within a two year period from the original date of purchase, the manufacturer will, without charge to the purchaser (excluding any charges incurred to have the product delivered to the manufacturer), repair or replace any part of the remote starter and/or alarm which the manufacturer agrees...
Need help?
Do you have a question about the 32xx Series and is the answer not in the manual?
Questions and answers