I Cannot Complete The Wireless Network Setup Configuration - Konica Minolta Bizhub 4000i User Manual

Home > Troubleshooting
Configuration

I Cannot Complete the Wireless Network Setup Configuration

Turn your wireless router off and back on. Then try to configure the wireless settings again. If you are unable to
resolve the problem, follow the instructions below:
Investigate the problem using the WLAN Report.
Cause
Your security settings (SSID/
Network Key) are not
correct.
Your machine's MAC
address is not allowed.
Your wireless LAN access
point/router is in stealth
mode (not broadcasting the
SSID).
Your security settings (SSID/
password) are not correct.
You are using Android
Your machine is placed too
far from your mobile device.
There are some obstructions
(walls or furniture, for
example) between your
machine and the mobile
device.
There is a wireless
computer, Bluetooth-
supported device,
microwave oven, or digital
cordless phone near this
machine or the mobile
device.
If you have checked and
tried all of the above, but still
cannot complete the Wi-Fi
> Network Problems
Action
• Confirm the security settings using the Wireless Setup Helper
utility.
• Select and confirm that you are using the correct security
settings.
- See the instructions supplied with your wireless LAN access
point/router for information on how to find the security
settings.
- The manufacturer's name or model number of the wireless
LAN access point/router may be used as the default security
settings.
- Consult with the access point/router manufacturer, your
Internet provider, or network administrator.
• For definitions of SSID and Network Key, see the entries SSID,
Network Key and Channels in the Glossary.
Confirm that this machine's MAC Address is allowed in the filter. You
can find the MAC Address on your machine's control panel.
• Enter the correct SSID name or Network Key manually.
• Check the SSID name or the Network Key in the instructions
supplied with your wireless LAN access point/router and
reconfigure the wireless network setup.
• Confirm the SSID and password.
- When you are configuring the network manually, the SSID
and password are displayed on your machine. If your mobile
device supports the manual configuration, the SSID and
password will be displayed on your mobile device's screen.
• For the definition of SSID, see the Glossary.
™ 4.0. If your mobile device disconnects (approximately six minutes after
using Wi-Fi Direct), try the one-push configuration using WPS
(recommended) and set this machine as a G/O.
Move your machine within about 3.3 feet (1 meter) of the mobile
device when you configure the Wi-Fi Direct network settings.
Move your machine to an obstruction-free area.
Move other devices away from this machine or the mobile device.
• Turn your machine off and back on. Then try to configure the Wi-
Fi Direct settings again.
> I Cannot Complete the Wireless Network Setup
Interface
Wireless
Wireless
Wireless
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
223