Konica Minolta Bizhub 4000i User Manual page 242

Hide thumbs Also See for Bizhub 4000i:
Table of Contents

Advertisement

Make sure you put the toner cartridge in correctly or it may separate from the imaging unit.
8. Clean the corona wire inside the imaging unit by gently sliding the tab from left to right and right to left several
times.
Be sure to return the tab to the Home position (a). The arrow on the tab must be aligned with the arrow on
the imaging unit. If it is not, printed pages may have a vertical stripe.
9. Install the toner cartridge and imaging unit assembly back into the machine.
10. Close the front cover of the machine.
Do not turn off the machine or open the front cover until the machine returns to Ready Mode.
The toner cartridge that comes with your machine is a Starter toner cartridge.
It is a good idea to keep a new toner cartridge ready for use when you see the Toner Low warning.
To ensure high quality printing, we recommend using only original toner cartridges. When you want to
buy toner cartridges, contact customer support.
DO NOT unpack the new toner cartridge until you are ready to install it.
If a toner cartridge is left unpacked for a long time, the toner life will be shortened.
The machine strongly recommends you DO NOT refill the toner cartridge provided with your machine.
We also strongly recommend you continue to use only original replacement toner cartridges. Use or
attempted use of third party toner and/or cartridges in this machine may cause damage to the machine
and/or may result in unsatisfactory print quality. Our limited warranty coverage does not apply to any
problem that is caused by the use of third party toner and/or cartridges. To protect your investment and
obtain premium performance from this machine, we strongly recommend the use of original Supplies.
238

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 5000i

Table of Contents