Konica Minolta Bizhub 4000i User Manual page 253

12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
13. Put the toner cartridge firmly into the imaging unit until you hear it lock into place.
Make sure you put the toner cartridge in correctly or it may separate from the imaging unit.
14. Install the toner cartridge and imaging unit assembly back into the machine.
15. Close the front cover of the machine.
16. Press to turn on the machine.
bizhub 5000i
1. Make sure the machine is in Ready Mode.
2. Press [Settings] > [Machine Information] > [Drum Dot Print].
3. Press [OK].
The machine prints the Drum Dot Check Sheet.
4. Press and hold
5. Open the front cover.
to turn off the machine.
249