Konica Minolta Bizhub 4000i User Manual page 286

Level 2 Level 3
WLAN WPS
WPS w/ PIN
Code
WLAN Status
MAC Address
Set to
Default
WLAN Enable
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
NFC -
Security IPsec
Network -
reset
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Settings] > [Reset Menu]
Level 2 Level 3 Descriptions
Network -
Factory Reset -
Level 4
-
-
Status
Signal
SSID
Comm. Mode
-
-
-
-
-
-
-
Device Name
SSID
IP Address
Status
Signal
-
-
-
-
Restore all network settings of your machine to the factory settings.
Reset the machine and restore the printer settings (including command settings) to the
factory settings.
Level 5 Descriptions
- Configure your wireless network settings
using the one-button push method.
- Configure the wireless network settings
using WPS with a PIN code.
- Display the wireless Ethernet link status.
- Display the signal condition.
- Display SSID.
- Display the current Communication Mode.
- Display the MAC address of the machine.
- Restore wireless network settings of your
machine to the factory settings.
- Turn the wireless interface on or off.
- Configure your Wi-Fi Direct network
settings using the one-button push
method quickly.
- Configure your Wi-Fi Direct network
settings using WPS with a PIN code
quickly.
- Configure your Wi-Fi Direct network
settings manually.
- Set your machine as the Group Owner.
- View your machine's device name.
- Display the Group Owner's SSID.
- Display your machine's IP Address.
- Display the Wi-Fi Direct network status.
- Display the current Wi-Fi Direct network
signal strength.
- Enable or disable the Wi-Fi Direct
connection.
- Turn the ID card function on or off.
- IPsec is an optional security feature of the
IP protocol that provides authentication
and encryption services. We recommend
contacting your network administrator
before changing this setting.
- Restore all network settings of your
machine to the factory settings.
282