Compaq 5000 Series End-User Replaceable Parts Program page 13

Steps 1 and 2 are to be done
outside the computer chassis.
The drive rails are not specific
to the left or right side of the
optical drive and can be
installed on either side of the
optical drive.
R CD-ROM, CD-RW,
EPLACING AND
V. Replacing the CD-ROM, CD-RW, and DVD Drives
To replace the CD-ROM, CD-RW, and DVD drives, complete
the following procedure:
Note: Save all the packing materials received with your replacement
drive. You will need them to return the defective part.
1. Attach the drive rails that were removed from the
defective drive to the replacement drive (see Figure 5-1).
2. Insert the replacement drive into the front of the computer
in the same location from which the defective drive was
removed. Slide the drive in until the drive rails snap into
place (see Figure 5-2).
DVD D
RIVES
Figure 5-1
Figure 5-2
13