Advertisement
PROMXMN & PROMXMNGR Promotional Counters
Assembly Instructions
Remove the components from the included carrying bag. The kit should include the folded plastic
frame, wooden countertop, two plastic shelves, two aluminum poles and plastic header.
Start by unfolding the plastic frame and positioning it so the sides are at 90 degree angles to the front.
Make sure that metal shelf supports are placed on the inside and the small metal feet are at the bottom.
Next, attach the two shelves to the inside of the display. Hooks on the shelves
connect to the support rails as shown above.
Advertisement
Table of Contents
Related Manuals for Displays2go PROMXMN
Summary of Contents for Displays2go PROMXMN
- Page 1 PROMXMN & PROMXMNGR Promotional Counters Assembly Instructions Remove the components from the included carrying bag. The kit should include the folded plastic frame, wooden countertop, two plastic shelves, two aluminum poles and plastic header. Start by unfolding the plastic frame and positioning it so the sides are at 90 degree angles to the front.
- Page 2 After the shelves are installed, rest the wooden countertop on top of the plastic frame. There are holes in the countertop to accommodate the two included poles. These poles connect the countertop to the frame and hold the header. See pictures below on how to connect the poles to the plastic frame.
- Page 3 These instructions apply to promotional counters with and without vinyl graphics. (Vinyl graphics come pre-installed onto the PROMXMNGR counter.)
Need help?
Do you have a question about the PROMXMN and is the answer not in the manual?
Questions and answers