Raven SmarTrax Installation Manual page 19

37-Pin Connector Port Location
FIGURE 11.
Connect the round, 37-pin connector from the node harness (P/N 115-4001-127) to the 37-pin port of the
3.
Case interface box.
Note:
Allow enough slack in the cable to allow storage tray under the seat cushion to be reinstalled.
CAN Connector Installed on Machine's CAN System
FIGURE 12.
Connect the CAN connector to the machine's existing CAN system.
4.
Manual No. 016-5032-083 Rev. D
CAN
Cab Component Installation
37-Pin
Connector
Port
15