Page 2
Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com.
Page 3
• Shut off power and make sure environment is safe before installation • Do not plug the Coaxial, Toslink, and CAT cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports •...
Page 4
Introduction The Coaxial/Toslink CAT5e/6 Extender - 300m extends digital audio signals up to 300 meters using an economical CAT5e/6 cable. Features • Transmits Coaxial/Toslink digital audio signals from source device to Coaxial/ Toslink audio output devices such as TVs, AVRs, and speakers up to 300 meters using economical CAT5e/6 cable •...
Figure 2: Receiver (RX) Hardware Installation Power off all devices including your audio source and audio output device. Connect your audio source device to the Transmitter's Coaxial or Toslink Input connector with a Coaxial or Toslink cable (cable not included). *Note: Only one input connector can be used at any one time.
Page 7
Connect your audio output device (TV, AVR, speakers, etc.) to the Receiver's Coaxial and/or Toslink Output connector (cables not included). Note: Both Coaxial and Toslink Outputs can be connected and produce sound simultaneously. Plug the included power adapter into the Transmitter's power jack, then plug the power adapter into a reliable power source.
Page 11
Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user’s guide. The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products.
Page 12
Thank you for choosing gofanco www.gofanco.com...
Need help?
Do you have a question about the AudioCATExt and is the answer not in the manual?
Questions and answers