Press Wheel Assembly - Landoll 5530 Operator's Manual

ASSEMBLY INSTRUCTIONS
AIR OPENER ASSEMBLY
3/4-10 HEX LOCK NUT

PRESS WHEEL ASSEMBLY

press wheel assembly
Press Wheel Assembly
1. Attach each press wheel assembly to each air
opener assembly on the Grain Drill using press
wheel arm pin and 3/4-10 hex lock nut (See
Figure 3-1.)
3-2
Figure 3-1: Press Wheel Assembly
Opener blades are extremely sharp. Exercise
extreme care when working on or near opener
blades. Do not allow opener blades to roll over or
fall onto any body part. Do not allow wrenches to
slip when working near blades. Never push
wrenches toward opener blades. Do not climb
over machine above opener blades. Failure to
stay clear of opener blade edges can cause
serious personal injury or death.
PRESS WHEEL ARM
PIN

DANGER
F-524-0410 Edition