Landoll 5530 Operator's Manual page 37

4. Width:
a. Press the FUNC button until the "WIDTH" icon
appears in the display. The number displayed is
the width of your implement in feet (See
Figure 4-14.)
b. To adjust the width, press the UP and DOWN
buttons. If a password has been entered, you will
not be able to adjust the width.
c. The width can be adjusted from 0 to 99.9 feet, in
tenths of a foot.
drill width
Figure 4-14: Drill Width
WIDTH
40.0
FT
OPERATION AND MAINTENANCE
5. Password:
a. The password function allows you to protect the
total acre count, pulses per mile, and width
settings with a password. This stops anyone
from accidentally changing those settings. When
the acre counter is shipped, the password is
disabled. You can modify the pulses per mile and
implement width at any time (See Figure 4-15.)
password disabled
Figure 4-15: Password Disabled
b. Press the FUNC button until the "PASS" icon
appears. The digits will display the word "ENT" or
"dIS".
c. If the display shows "dIS":
The password is disabled. The total acre count,
pulses/mile, width, and password settings can be
adjusted using the UP and DOWN buttons. The
password can also be changed using the UP and
DOWN buttons.
PASS
dIS
4-17