Fertilizer - Rate Adjustment - Landoll 5530 Operator's Manual

OPERATION AND MAINTENANCE
m153837
Fertilizer – Rate Adjustment
1. The dry fertilizer rate is adjusted by changing
sprocket ratios for each section. See Figure 4-28 for
desired settings. For best results use clean dry
fertilizer, free of clumps, or foreign material.
IMPORTANT
The operator must verify actual fertilizer output
before planting.
Density
Conversion Factor
Example: using a dry fertilizer with a density of 70 lbs/ft
50 x .93 = 46.5 (use a setting from the rate chart nearest 46.5 lbs/acre)
4-26
Figure 4-28: Fertilizer Box Chart
Dry Fertilizer Density Conversion Chart
Based on Average Density of 65 lbs./ft.
50 55
1.30 1.18
3
Table 4-1: Dry Fertilizer Density Conversion Chart
2. The fertilizer chart is based upon average size dry
fertilizer with a density of 65 lbs per cubic foot. If
using a fertilizer with a different density, apply the
following conversion factors, and use the closest rate
for application (See Table 4-1.)
60 65
1.08 1.00
and a desired application rate of 50 lbs/acre.
70 75
.93 .87
F-524-0410 Edition
80
.75