Table of Contents
Advertisement
Stacking the Ovens
ASSEMBLING STACKED OVEN:
1. Match holes on the legs with oven bottom base and screw with bolts provided.
2. Set top oven on top of bottom oven.
3. Bolt down at rear and front as shown. Remove top kick plate to access screwing the front bolts.
CASTER INSTALLATION ON STACKED OVENS:
If casters are provided, match holes on the caster with holes on the oven bottom base and fasten with bolts provided.
NOTE: Front casters are locking type.
CAUTION
IF THE APPLIANCE IS SUPPLIED WITH CASTERS, UNIT MUST BE CONNECTED USING FLEXIBLE CON-
DUIT WITH SUITABLE STRAIN RELIEF ATTACHED TO SIDE OF REAR CONNECTION BOX. PLEASE EN-
SURE CASTER BRAKES ARE ENGAGED AFTER CONNECTION.
INSTALLATION
Figure 5
8
CONTACTOR
TERMINAL BLOCK
LIGHT BOX
MOTOR
BOLT DOWN WITH
(2) 1/4-20 NUT AND BOLT
BOTH SIDES
Advertisement
Table of Contents
