Table of Contents
Advertisement
Assembly to Legs or Stand
CASTER INSTALLATION ON LEGS
If casters are provided, match holes on the caster with holes on the oven bottom base and fasten with bolts provided.
NOTE: Front casters are locking type.
Instructions for oven Leg (Stand) Assembly:
Assemble the leg assembly as follows: (For 8000 & 8200 Models Only)
1. Remove legs from package.
2. Line leg plate holes with holes at the bottom of the base.
3. Secure with (4) 3/8-16 bolts.
Figure 3
INSTALLATION
6
Advertisement
Table of Contents
