Stacking Assembly
Assembling Stacked Oven:
1. Match holes on the legs with oven bottom base and screw with bolts provided.
2. Set top oven on top of bottom oven.
3. Bolt down at rear and front as shown in (Figure 3). Remove top kick plate to access
screwing the front bolts.
Caster Installation on Stacked Ovens:
If casters are provided, match holes on the caster with holes on the oven bottom base and fasten with
bolts provided. NOTE: Front casters are locking type.
IF THE APPLIANCE IS SUPPLIED WITH CASTERS, UNIT MUST BE CONNECTED USING
FLEXIBLE CONDUIT WITH SUITABLE STRAIN RELIEF ATTACHED TO SIDE OF REAR
CONNECTION BOX. PLEASE ENSURE CASTER BRAKES ARE ENGAGED AFTER CONNECTION.
Figure 3, Stacked Models 8092 and 8292 Shown
NOTICE TO INSTALLER:
12