Stacking Assembly
Assembling Stacked Oven:
1. Match holes on the legs with oven bottom base and screw with bolts provided.
2. Set top oven on top of bottom oven.
3. Bolt down at rear and front as shown in (Figure 3). Remove top kick plate to access
screwing the front bolts.
4. Assemble bottom flue extension (not shown).
Caster Installation on Stacked Ovens:
If casters are provided, match holes on the caster with holes on the oven bottom base and fasten with
bolts provided. NOTE: Front casters are locking type.
Figure 3, Stacked Models 8192 and 8392 Shown
12