Compaq 5000 Series Replacing page 17

Replacing a system board end-user replaceable parts program

Hide thumbs Also See for 5000 Series:

Table of Contents

Some units may not include an

AGP slot or a graphics card.

If your unit does not include

these components, you can

skip Step XII - Removing the

Graphics Card and Step VII -

Replacing the Graphics Card.

EPLACING THE

YSTEM

XI. Locating The Graphics Card

See the illustration for the location of the graphics card 1

and the AGP slot 2 on the system board (see Figure 11-1).

Important: The location of the AGP slot may vary slightly by model. The

AGP slot is the first in a series of slots on the system board and is usually

the slot located closest to the microprocessor/heatsink assembly.

OARD

Figure 11-1

Table of Contents

7000 series