Screen Innovations Nano Box Installation Instructions Manual page 8

WIRING - 485
RJ45 DATA CABLE FOR DATA HUB ONLY
If the shade will be connected to a Data Hub or Power Panel device port for data, terminate with
the following pinout:
Pin 1 Pin 8
RJ45
TERMINATION FOR 4 - CONDUCTOR THIRD PARTY CABLE
If the pre-wire does not have a third insulated data conductor for the 485 ground, terminate the
wire as shown below. Use the same termination on both ends.
Pre-Wire
22 AWG Jumper wire
Wiring - 24v DC - 485
485 Wiring Port
Utilizing RJ-45 TIA-568B termination standard
Pin# Color
1 Orange White
2 Orange
3 Green White
Blue
4
Blue White
5
Green
6
Brown White
7
Brown
8
For Shade Data, use Pins 1, 2 & 8
Function
485 (+)
485 (-)
Reserved
Power 24v DC (V+)
Power 24v DC (V+)
Reserved
485 Ground (G)
485 Ground (G)
Shade
7