Three Speed Wiring - Afg Smt Es-3.0 - QuietCool AFG Series Owner's Manual

5. Cap the yellow wire from the Hub.
6. Ground the green wire from the fan and
the green wire from the power cord to the
ground screw in the Hub.
7. Set the dip switch positions inside the
Hub as shown in the Figure B.
8. Power-on the Hub. The Power LED
indicator will be lit.
9. Press the Test button to make sure the
fan works. The Test LED indicator will
blink three times every two seconds
indicating 2-speed and the fan will be on
high. Press the Test button again and the
fan will switch to low speed and the Test
LED indicator will blink once every two
seconds. Press the Test button again and the fan should shut off and the LED will be off.
10. If the fan doesn't operate as described in step 9, please check the dip switch postion/wiring.
3.2 Three Speed Wiring - (AFG SMT ES-3.0)
1. Using a wire nut, connect the black wire from the power cord and the black wire from the fan to the black wire
from the Hub.
2. Connect the white wire from the power cord and the white wire on the fan to the white wire from the Hub.
3. Connect the red wire from the fan to the red wire on the Hub
4. Connect the yellow wire from the fan to the yellow wire on the Hub
5. Connect the blue wire from the fan to
the blue wire on the Hub
6. Ground the green wire from the fan and
the green wire from the power cord to
the ground screw in the Hub.
7. Set the dip switch positions inside the
Hub as shown in Figure C.
8. Power-on the Hub. The Power LED
indicator will be lit.
9. Press the Test button to make sure the
fan works. The Test LED indicator will
blink three times every two seconds
indicating 3-speed and the fan will be on
high. Press the Test button again and the
fan will switch to medium speed and the
LED will blink twice every two seconds.
Press the Test button again and the fan
will switch to low speed and the LED will blink once every two seconds. Press the Test button again and the fan
should shut off and the LED will be off.
10. If the fan doesn't operate as described in step 9, please check the dip switch postion/wiring.
1-888-QUIETCOOL
Figure B
Attach green ground wires to ground screw Attach green ground wires to ground screw
POWER POWER
Attic Fan Attic Fan
All White Common Wires Together All White Common Wires Together
Figure C
Attach green ground wires to ground screw Attach green ground wires to ground screw
POWER POWER
Attic Fan Attic Fan
All White Common Wires Together All White Common Wires Together
Set dip switches: Set dip switches:
TIMER TIMER
TEST TEST PAIR PAIR
Set dip switches: Set dip switches:
ON ON
1 1
TIMER TIMER
TEST TEST PAIR PAIR
1 - OFF 1 - OFF
2 - ON 2 - ON
3 - OFF 3 - OFF
ON ON
1 1 2 2 3 3
Power Power
Cord Cord
1 - OFF 1 - OFF
2 - OFF 2 - OFF
3 - ON 3 - ON
2 2 3 3
Power Power
Cord Cord
5