Advertisement
LSA-PLUS
Specifications
MECHANICAL
W ire range for solid copper conductors
(single wire per contact):
W ire range for stranded tinned copper conductors
(single wire per contact):
Two wires per contact (same gauge):
Wire insulation diameter range (PE, PVC):
Number of wire terminations:
Number of disconnect port plug-in cycles:
ELECTRICAL
NEXT (average worst case performance):
Insulation resistance:
Contact resistance:
Electrical strength / impulse strength:
Operation voltage for basic insulation (B/S):
Transient overvoltage for B/S insulation:
Current carrying capacity:
Impulse current:
Air gap / creepage:
ENVIRONMENTAL AND SAFETY
Safety Compliance:
Flammability rating of plastic housing:
Storage temperature range:
Operating temperature range:
Telcordia
compliance:
®
MATERIALS
Plastics:
Contact plating:
w w w . a d c . c o m
NT Termination Blocks
®
Equipment Side of Block
112 mm (4.4")
Cross-Connect Side of Block
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
0.4 mm to 0.8 mm (26 to 20 AWG)
7 x 0.12 mm to 7 x 0.32 mm (36 to 28 AWG)
0.4 mm to 0.65 mm (26 to 22 AWG)
0.7 mm to 1.6 mm (0.02" to 0.06")
≥ 200
≥ 750
39 dB @ 100 MHz:
≥ 50 GΩ
≤ 1 mΩ (typical)
2 kV / 3.6 kV (8/20 μs)
120 V TNV
1.5 kV
5 A (50 Hz, 1 s)
5 kA (8/20 μs)
2.8 mm / 2.93 mm (.11"/.12")
UL 1863
UL 94 V-0
-40° to 90° C (-40° to 194° F)
-20° to 80° C (-4° to 176° F)
Telcordia Technologies TR-NWT-001195,
"Generic Requirements for Insulation
Displacement Connector (IDC) Cross-Connect
Terminal Blocks", Issue 1, June 1992
PBT
Silver (Ag)
27.5 mm
(1.1")
39.5 mm (1.6")
17.5 mm (0.7")
Side View
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Advertisement
