Advertisement
Quick Links
High Density LSX 288-Position Panel
Termination and Termination/Splice Configurations
LSX 288-Position Preterminated Panel
ADC introduces the new high-density LSX 288-position panel available preterminated
with intrafacility (IFC) or outside plant (OSP) cables or in termination and splice configurations.
ADC's 288-position LSX panel (with either SC or LC) offers integrated vertical cable guides
(VCG's) within the panel, as well as on each side of the panel. VCG's effectively segregate cables,
aiding in easy-to-follow routing paths. The angled bulkhead style panel offers additional protection
from bends that can increase attenuation and loss.
Features and Benefits:
•
Integrated cable management
•
Angled bulkhead panel
•
Vertical cable guides
•
Available in SC and LC connector styles and multiple fiber cable styles
•
288 terminations using either SC or LC connectors
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
Advertisement
Related Manuals for ADC High Density Position Panel LSX 288
Summary of Contents for ADC High Density Position Panel LSX 288
-
Page 1: Features And Benefits
(IFC) or outside plant (OSP) cables or in termination and splice configurations. ADC’s 288-position LSX panel (with either SC or LC) offers integrated vertical cable guides (VCG’s) within the panel, as well as on each side of the panel. VCG’s effectively segregate cables, aiding in easy-to-follow routing paths. -
Page 2: Cable Length
SC/UPC LC/APC LC/UPC Other configurations are available upon request. Please contact ADC Technical Assistance Center. w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 279 mm x 584 mm x 305 mm (11" x 23" x 12") - Page 3 Panel is shown here from front vantage (left) and back vantage (right) ADC’s 288-positon LSX panel is also available in a termination and splice configuration. While ADC recommends off-frame splicing in high-density applications, often floor-space is limited and on-frame splicing is required in a high density environment. In a 18-inch deep frame*, this panel solution saves...
- Page 4 660 mm (26") aDC’s recommended fiber frame lineup uses four frames with 2 mm fiber jumpers to maintain the industry standard 2-inch patch cord pile-up The preterminated LSX-288 solution utilizes a traditional frame designed to fit a variety of termination, splice and storage applications.
- Page 5 660 mm (26") aDC’s recommended fiber frame lineup uses four frames with 2 mm fiber jumpers to maintain the industry standard 2-inch patch cord pile-up The termination and splice LSX-288 solution utilizes a traditional frame designed to fit a variety of termination, splice and storage applications.
- Page 6 ADC’s homerun splitter solution incorporates the LSX 288-position distribution panel along with plug and play splitter modules for central office splitting. Able to effectively manage 1,152 homes within a seven-foot frame, this solution offers excellent density with ADC’s built-in cable management. In addition, these same plug and play splitter modules are commonly used within ADC’s outdoor Fiber Distribution Hubs (FDHs), allowing for easy-to-manage inventory with one splitter type versatile enough for both inside and outside environments.
- Page 7 High Density LSX 288-Position Panel Outside Plant Controlled Environment Active Cabinet Solution ADC’s LSX-288 panels are also well suited to a controlled environment cabinet where limited rack space and high termination counts are necessary. Used in conjunction with ADC’s Fiber Management Tray and RiserGuide on-demand cable management, this solution can meet both the termination demands, and cable management requirement for a future-proofed network.
- Page 8 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.