Appendix A - Specifications - ADC HiGain HLU-432 User Manual

150-432-100-02, Revision 02
A
PPENDIX
This appendix provides general specifications, pinout diagrams for the craft port and card-edge connector, HDSL
insertion loss guidelines, and power consumption and dissipation tables.
HDSL Line Code
HDSL Output
HDSL Line Impedance
Maximum Provisioning Loss
Line Clock rate
HDSL Start-up Time
One-way DS1 Delay
DSX-1 Line Impedance
DSX-1 Pulse Output
DSX-1 Input Level
DS1 Line Rate
DS1 Line Format
DS1 Frame Format
Maximum Heat Dissipation
Fusing
HDSL Span Voltage
Electrical Protection
Operating Temperature
Operating Humidity
Mounting
Dimensions
Height:
Width:
Depth:
Weight:
Wander (Looped)
WB Jitter (Looped)
NB Jitter (Looped)
HLU-432 List 1
A - S
PECIFICATIONS
784 kbps 2B1Q
+13.5 dBm ±0.5 dB at 135 W
135 W
35 dB at 196 kHz, 135 W
Internal Stratum 4 clock
30 sec. (typical), 60 sec. (maximum) per span
<200 µs per span without doublers. Doubler delay <80 µs
100 W
pk-pk
6 V , pre-equalized for 0-655 feet of ABAM cable
+1.5 to -7.5 dBDSX
1.544 Mbps ±200 bps
AMI, B8ZS, or ZBTSI
ESF, SF, or UNFR
See "Power Consumption" on page 52
Internal; connected to Fuse Alarm output on pin 32
-135 Unipolar or ± 112 Bipolar
Secondary surge and power cross-protection on HDSL ports. Requires
external primary protection
-40 °F to +149 °F (-40 °C to +65 °C)
5% to 95% (non-condensing)
200 or 400 mechanics
5.9 in. (15 cm)
1.4 in. (3.5 cm)
5.6 in. (10 cm)
8 oz. (.23 kg)
0.3 UI maximum (1 UI = 648 ns)
0.2 UI maximum
0.1 UI maximum
July 18, 2002

Appendix A - Specifications

51