Specifications - Clarke DMD66 Operation & Maintenance Instructions Manual

Thank you for purchasing this CLARKE Dehumidifier.
Before attempting to use the machine, please read this manual thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to the unit giving you long and satisfactory service.
This CLARKE product is guaranteed against faulty manufacture for a pe-
riod of 12 months from the date of purchase. Please keep your receipt as
proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not effect your statutory rights.

Specifications

Model No: ............................................................................................ DMD 66
Part No: ............................................................................................... 6470645
Voltage: ....................................................... 230 &110/115 Volt 1Phase 50Hz
Fuse Rating: .................... See Product Data Plate (13A-230v & 16A-110v)
Running Current: .................................................. 3.5A (230v) & 7.3A (110v)
Refrigerant: .................................................................................. R417A (R59)
Temperature Range: ...................................................................... 5º to 35ºC
Weight: ...................................................................................................... 44Kg
Dimensions: ..................................... 770mm (H) x 565mm (W) x 460mm (D)
Max Motor Wattage When Running: ................................................... 820W
Max Extraction Rate: ............................................................. 60 litres (24 hrs)
The DMD66 is equipped with a manually operated dual voltage selector switch.
The DMD66 is designed for INTERNAL USE ONLY.
Extension leads, if used, should be; correctly rated for the inductive load, fully unwound,
loosely coiled and never run through water or over sharp edges, this applies equally to the
mains lead on the dehumidifier.
Do not dispose of with general household waste. It must be disposed of according to law, at a
properly recognised disposal facility
Please note that the details and specifications contained herein, are correct at the time of going to print. However,
CLARKE International reserve the right to change specifications at any time without prior notice.
CLARKE GUARANTEE
-2-