Related Manuals for Clarke CD1250
Summary of Contents for Clarke CD1250
- Page 1 DEHUMIDIFIER DEHUMIDIFIER MODEL NO: CD1250 Part No: 6470622 USER INSTRUCTIONS 0306...
-
Page 2: Table Of Contents
Please Note that details and specifications herein, are correct of time of going to print. However CLARKE International reserve the right to change specifications at any time without prior notice. Copyright CLARKE International All rights Reserved 03/2006. - 1 -... -
Page 3: Safety Precautions
SAFETY PRECAUTIONS WARNING: PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING This appliance is intended for domestic and small office use ONLY. Any other use is not recommended by the manufacturer and may cause fire, electric shocks or other injury to person or property. •... -
Page 4: Electrical Connections
SAFETY PRECAUTIONS CONTINUED • Where possible avoid the use of an extension cable as they may overheat and become a fire risk. Only use an extension cord after ensuring it is in perfect condition. • DO NOT use the unit without the AIR FILTER. •... -
Page 5: Technical Specification
TECHNICAL SPECIFICATION Description: Model No: .................... CD1250 Part No: ....................6470622 Use: ................Domestic/Small office Product Specification: Operating Voltage: .................. 230V Motor Wattage: ..................420W Operating Temperature: ..............5°C - 35°C Max Extraction Rate: ..............16 Litres/Day Tank Capacity: ..................5 Litres Dimensions &... -
Page 6: Parts Description
PARTS DESCRIPTION FRONT VIEW Control panel Adjustable air Handle outlet Bucket Finger grip to pull out bucket (both sides) Casters REAR VIEW Nylon filter and activated carbon filter Air inlet Drain connector Power cord storage - 5 -... -
Page 7: Setup & Operation
SETUP AND OPERATION ACTIVATED CARBON FILTER: To use an activated carbon filter, pull the filter frame out from the back of the machine. Unpack the carbon filter, fit into the frame and refit. Pull up here to lift the inner frame Insert and fix the carbon filter Nylon filter frame AIR OUTLET:... - Page 8 SETUP AND OPERATION CONTINUED CONTROL PANEL If the unit has been stored or moved laying down leave it to stand in an upright position for two hours before operating. Insert the mains plug into a power socket, the ‘OFF’ light (5) illuminates. Press the ‘SELECT’...
- Page 9 SETUP AND OPERATION CONTINUED BUCKET EMPTYING 1. When the bucket is full the ‘FULL’ light will blink. The machine will also beep three times. Wait a few minutes to allow the machine to stop operating before removing the bucket. To remove the bucket, grip each side and lever out, carefully lift and pour the water away, then replace back into the correct position.
- Page 10 SETUP AND OPERATION CONTINUED SAFE OPERATION NEVER insert small objects into the unit as this will damage it and cause a hazard. Keep the area around the air intake clear from obstruction minimum 0.5m. RELOCATING THE UNIT Casters are fitted to the unit to allow it to be easily moved. ALWAYS turn OFF and unplug from the mains supply before moving.
-
Page 11: Maintenance
MAINTENANCE CLEANING THE AIR FILTER If the filter(s) is clogged with dust the airflow and the performance of the machine will be affected and the unit will become noisy. It is recommended that the air filter is checked and cleaned every two weeks, or more frequently in dusty conditions. Turn the machine OFF and remove the filter. -
Page 12: Troubleshooting
TROUBLE SHOOTING PROBLEM: The unit fails to run: CAUSE: TROUBLE SHOOTING: Is the power cord unplugged or the Plug the unit in and switch the power power OFF? Is the ‘FULL’ light illuminated? Check if the bucket is full, empty if required, check that the bucket is installed correctly. -
Page 13: Parts List
Inner Frame ............... EH125002 Carbon Filter ..............EH125003 WARNING: The use of spare parts or accessories, other than those supplied by CLARKE international or one of its recognised dealers, may be hazardous and could invalidate the guarantee. - 12 -...