CHC i80 GNSS Quicktour page 9

Transparent, Step Value as 25KHz.
Set the channel 5.
Note: Please keep base and rover in the
same protocol and frequency or rover cannot
get the correction from base.
Other radio parameters can be set according
to the work condition.
After setting, please click [Save] button to
i80 GNSS Receiver Quick Tour with LandStar 7 (UHF Rover)
save the work mode.
12. A name is necessary for a work mode,
user can type in the name as their wish.
13. Now, the work mode is available in the
list. Please select the work mode then click
[Accept] button.
8