Safety Precautions - Christie Q Series Safety Manual

Safety Precautions

WARNING
Never use the projector if a problem should occur.
Smoke, strange odor, no image, no sound, excessive sound, damaged
casing or elements or cables, penetration of liquids or foreign matters, and
other abnormalities can cause fire or electrical shock.
In these cases, immediately turn off the power and disconnect the power plug
from the power outlet. After making sure that the smoke or odor has stopped,
contact your dealer. Never attempt to repair it by yourself to avoid the injury
risk.
• The power outlet should be close to the projector and easily accessible.
Use special caution for children and pets.
Incorrect handling could result in fire, electrical shock, injury, burn or vision
problem.
Use special caution in households where children and pets are present.
Do not put liquids or foreign objects in the projector.
Penetration of liquids or foreign objects could result in fire or electrical shock.
Use special caution in households where children are present.
If liquids or foreign objects should enter the projector, immediately turn off the
power switch, disconnect the power plug from the power outlet and contact
your dealer.
• Do not place the projector near water (for example, a bathroom, a beach,
and so on).
• Do not expose the projector to rain or moisture. Do not place the projector
outdoors.
• Do not place flower vases, pots, cups, cosmetics, liquids such as water, and
so on, on or around the projector.
• Do not place metals, combustibles, and so on, on or around the projector.
• To avoid penetration of foreign objects, do not put the projector into a case
or bag together with any thing except the accessories of the projector, signal
cables and connectors.
Never disassemble and modify.
The projector contains high voltage components. Modification and/or disassembly of
the projector or accessories could result in fire or electrical shock.
• Never open the cabinet.
• Ask your dealer for repairs and cleaning inside the projector.
Do not give the projector any shock or impact.
If the projector should be physically shocked and/or broken, it could result in
injury, and continued use could result in fire or electrical shock.
If the projector should be physically shocked, immediately turn off the power
switch, disconnect the power plug from the power outlet and contact your
dealer.
Do not place the projector on an unstable surface.
If the projector should be dropped and/or broken, it could result in injury, and
continued use could result in fire or electrical shock.
• Do not place the projector on an unstable, slanted or vibrant surface such as
a wobbly or inclined stand.
• Use the caster brakes placing the projector on a stand with casters.
• Do not set the projector on the terminal side, rear end, or front.
• In the case of a ceiling installation or the like, contact your dealer before installation.
DWU1052/DHD1052
Safety Guide
2
Disconnect the
plug from the
power outlet.
Do not
disassemble.
020-000859-01 Rev. 1 (12-2015)
LIT GUID SAFE DWU/DHD1052