Socket DURASCAN Series User Manual page 23

Windows
In this mode the scanner functions and communicates similar to a
keyboard. Therefore, scanner will work with Notes, and any other
application that support an active cursor.
Highly recommended, allows two-way communications with Android, or
Windows Devices. Scanner-enabled app software installation
required.
1. Turn Bluetooth on for your device. Go to Settings > Bluetooth. A
Bluetooth Devices search will begin.
2. Tap Socket D700[xxxxxx] in the list of Devices found. After a few
seconds the status will change to "Connected" or "Paired" and the
scanner blue light will stop blinking and turn solid blue.
Now you are ready to scan barcodes!
SET UP-BASIC MODE
23