Fe/Ge Electrical Module; Ac Power Cables And Ground Cables; Outdoor Ac Power Cables - Huawei ATN 905 Product Description

ATN 905 Multi-service Access Equipment
Product Description
Item
Encapsulation type
RJ-45 electrical interface
specification
Electrical module code

FE/GE Electrical Module

Table 4-25
Table 4-25 Technical specifications of the FE/GE electrical interface
Item
Interface rate
Encapsulation type
RJ-45 electrical interface
specification
Electrical module code
4.4 Cables
This chapter describes various optical fibers and cables used on the equipment.
Use the cables delivered with outdoor ATN 905 devices because these cables meet outdoor environment
requirements and match the cable apertures on the devices.

4.4.1 AC Power Cables and Ground Cables

AC power cables are used to provide external power supplies for the ATN 905 device while the
PGND cable is used to ground the ATN 905 device.

Outdoor AC Power Cables

Outdoor AC power cables are used to provide external power supplies for the ATN 905 device
and the PE cable is used to ground the ATN 905 device.
Figure 4-9
and
Issue 01 (2013-05-30)
describes technical specifications of the interface on the FE/GE electrical module.
NOTE
shows the appearance of the AC power cable used for an outdoor ATN 905 device
Table 4-26 lists the technical specifications of the AC power cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Specification Requirement
SFP
Compliance with IEEE 802.3
34100080
Specification Requirement
10 Mbit/s, 100 Mbit/s, 1000 Mbit/s
SFP
Compliance with IEEE 802.3
34100052
4 Hardware Structure
49