Figure 4-5 Cable Connections (In Fe Direct Connection Mode) - Huawei UAP2105 User Manual

4 Installing the UAP2105
Step 3 Check the cables to ensure that all connections are secure.
----End
4-6
The UAP2105 is directly connected to the Ethernet through a device, such as a router. The
number of devices used in FE direct connection mode is smaller than the number of devices
used in PPPoE mode. As a result, the UAP2105 provides higher uplink and downlink rates.
1. Connect the UAP2105 to an idle LAN port on the router through an Ethernet cable.
The UAP2105 and the computer for local maintenance should be connected to the
same router.
2. Connect the router to the Ethernet.
For details on connections, see the documents delivered with the router.
Figure 4-5 shows the cable connections in FE direct connection mode.

Figure 4-5 Cable connections (in FE direct connection mode)

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
UAP2105
User Guide
Issue 03 (2009-08-20)