Huawei ATN 905 Product Description page 44

ATN 905 Multi-service Access Equipment
Product Description
Item Category
Service electrical
interfaces
Button Reset button
Indicators Device status indicator
Electrical interface
status indicator
SFP interface status
indicators
NOTE
l ATN 905A
l FE/GE2 and FE/GE3 are Combo interfaces and either of them includes one SFP interface and one electrical interface. The
SFP and electrical interfaces cannot be used at the same time.
l FE/GE electrical interfaces do not support PoE.
l ATN 905A-P
l FE/GE1 is a Combo interface that includes one SFP interface and one electrical interface. The SFP and electrical interfaces
cannot be used at the same time.
l FE/GE electrical interfaces support PoE. FE/GE3 supports a maximum output power of 130 W power (non-standard PoE,
mainly used for Huawei small base station devices) while FE/GE1 and FE/GE2 shares 60 W power consumption.
Issue 01 (2013-05-30)
Silk Screen
FE/GE2 and FE/GE3
(ATN 905A)
FE/GE1 to FE/GE3 (ATN
905A-P)
RST
ALM
STAT
PWR
-
L/A2 to L/A5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Receive FE/GE services using the
Ethernet Cables.
Receive FE/GE services using the
Ethernet Cables and support power over
Ethernet (PoE).
When you press and then release this button,
the board is reset.
Indicates alarms.
Indicates the working
Indicates the power status.
One LINK indicator and one ACT indicator
are present above each RJ-45 electrical
interface. They are used to indicate the
connection status and
transmission status.
Indicates the port connection status or
data receiving and transmission
4 Hardware Structure
4.4.2
4.4.2
status.
port
data receiving and
status.
38