Huawei ATN 905 Product Description page 23

ATN 905 Multi-service Access Equipment
Product Description
Features and Functions
Service
Features
Issue 01 (2013-05-30)
Description
Physical-layer clock synchronization and 1588v2 time
synchronization.
NOTE
1588v2 frequency synchronization is not supported. To implement
1588v2 time synchronization, configure physical-layer frequency
synchronization first.
Supports G.8032 (ERPS, Ethernet Ring Protection
Switching): As defined in ITU-T G.8032, ERPS is a
protocol used to block specified ports to prevent loops at the
link layer of an Ethernet network.
FTP Server/Client, TFTP Client.
Ethernet VLAN
Features
STP/RSTP/MSTP.
IP Features TCP/IP protocol
suite
ACL.
DHCP Relay/Client.
Ping, Tracert and
NQA.
Configuration of secondary IP addresses for all physical and
logical interfaces.
Routing Static routes.
Protocol
Dynamic routes
VRF Lite Access of a CE to
Features an L3VPN through
Layer 3 interfaces.
Static routes, RIP, OSPF, or IS-IS running between a CE
and a PE .
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Product Features and Functions
l Port number-based VLAN
division.
l Inter-VLAN port isolation.
l VLANIF interfaces.
l MAC address limit.
l Unknown unicast/multicast/
broadcast suppression.
l VLAN trunk.
l 1:1 VLAN Mapping.
l QinQ tunnel and flexible QinQ.
ICMP, IP, TCP, UDP, socket (TCP/
UDP/Raw IP), and ARP.
NQA can detect the status of ICMP,
TCP, UDP, DHCP, FTP, HTTP, and
SNMP services and test the response
time of the services.
RIP, OSPF, ISIS.
such as Ethernet, and VLANIF
interfaces.
17