Outdoor Atn 905 Devices; Differences Between The Two Models Of Outdoor Atn 905 Devices - Huawei ATN 905 Product Description

ATN 905 Multi-service Access Equipment
Product Description
Status Description
On (red)
Blinking (red)
Off

4.2 Outdoor ATN 905 Devices

Outdoor ATN 905 devices are small-sized, support the IP65 protection rating, and satisfy outdoor
installation requirements.
Outdoor ATN 905 devices have two models and
Table 4-8 Differences between the two models of outdoor ATN 905 devices
Device
Model
ATN 905A
ATN 905A-P
As shown in
same when their maintenance covers are closed.
Issue 01 (2013-05-30)
System
Control Board
ANP1CXPD
ANP1CXPE
NOTE
Interfaces of an outdoor ATN 905 device are located on the system control board and interface board.
Boards are fixed into the device. The main difference between the two models of outdoor ATN 905 devices
is that they have different interfaces.
Figure 4-3, appearances of the two models of outdoor ATN 905 devices are the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Indication
The input optical power was too low.
The input optical power was too high.
An optical fiber or electrical cable is not connected or is
incorrectly connected to the service port.
Table 4-8
Interface Board
ANP1EM6C
-
4 Hardware Structure
lists the differences between them.
Switching PoE
Capacity
6GE Not
supported
4GE Supported
34