Huawei ATN 905 Product Description page 15

ATN 905 Multi-service Access Equipment
Product Description
Features and Functions
Issue 01 (2013-05-30)
Description
Ethernet VLAN
Features
STP/RSTP/MSTP.
IP Features TCP/IP protocol
suite
ACL.
DHCP Relay/Client.
Ping, Tracert and
NQA.
Configuration of secondary IP addresses for all physical and
logical interfaces.
Routing Static routes.
Protocol
Dynamic routes
VRF Lite Access of a CE to
Features an L3VPN through
Layer 3 interfaces.
Static routes, RIP, OSPF, or IS-IS running between a CE
and a PE .
QoS Diff-Serv Model
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Product Features and Functions
l Port number-based VLAN
division.
l Inter-VLAN port isolation.
l VLANIF interfaces.
l MAC address limit.
l Unknown unicast/multicast/
broadcast suppression.
l VLAN trunk.
l 1:1 VLAN Mapping.
l QinQ tunnel and flexible QinQ.
ICMP, IP, TCP, UDP, socket (TCP/
UDP/Raw IP), and ARP.
NQA can detect the status of ICMP,
TCP, UDP, DHCP, FTP, HTTP, and
SNMP services and test the response
time of the services.
RIP, OSPF, ISIS.
Ethernet interfaces, Ethernet sub-
interfaces, Eth-trunk interfaces, Eth-
trunk sub-interfaces, sub-interfaces
for QinQ VLAN tag termination,
VLANIF interafces
Multiple service flows can be
aggregated into a Behavior Aggregate
(BA) and then processed based on the
same Per-Hop Behavior (PHB). This
simplifies the processing and storage
of services.
9