Water And Treatment Menu; Water Level - PoolCop Evolution Installer And User Manual

P o o l C o p M a n u a l : V 4 2 E N
5.4 W T
ATER AND
Water level, pH
disinfection settings
Wa t er Level
Set water level control
parameters. PoolCop can be
configured to automatically
refill and reduce water level.
When PoolCop is updating the water level, the last known value blinks on the screen. No action will be taken as long as the new
level is not refreshed (displayed level value will stop blinking). An update is performed every 15minutes when the pump is
stopped.
Make sure to keep at least 30 minutes between filtration cycles to allow water level to function properly.
Installed
With INSTALLED: YES, the menu options display and Alerts are activated.
Water level Control Modes
Water level is updated every 15 minutes when the filtration is stopped.
With mode: READ, PoolCop will indicate the water level on the screen but will not
take any action to control it. Should the level be
displayed.
With mode: REFILL, if the level is
open to refill the pool until the
will be displayed but the level will not be reduced.
If the pump starts during refill, the valve will close, and refilling will be postponed until
the next pump OFF period unless
continue with the pump running.
With mode: REDUCE, level will be automatically reduced if V_HIGH. If the level is
LOW, an alert will be displayed but pool will not be refilled.
With mode: AUTO, control combines
www.poolcop.com
M
REATMENT ENU
Water level control
pH control
ORP Control
and
Remnant injection
S E L E C T
W A T E R L E V E L
Installed
Mode
Cont. Refill
Max Duration
Draining
S E L E C T
LOW
LOW the refill system commands the supply valve to
HIGH level is detected. If the level is V_HIGH, an alert
CONT. REFILL: YES, in which case pool refilling will
REFILL and REDUCE
W A T E R A N D
T R E A T M E N T
Q U I T
: YES
: AUTO
: NO
: 60 mn
:120 sec
Q U I T
NOTE:
or V_HIGH, an alert will be
functionalities
P a g e | 8 3
Text: Installed
Default: NO
Entries: YES;
NO
Text: Mode
Default: Read
Entries: Read;
Refill;
Reduce;
Auto
PCFR