Declaration Of Conformity Ce; Important Information, Safety Notices And Precautions; Norms And Connexions - PoolCop Evolution Installer And User Manual

P o o l C o p M a n u a l : V 4 2 E N
1.2 D
ECLARATION OF
The manufacturer declares that the equipment named above has been designed to comply with the relevant sections of the below
referenced specifications. The unit complies with all applicable essential requirements of the Directives.
Manufacturer: PCFR SAS, La remise, 130 boulevard du Nord, 84160 Cucuron (FRANCE)
Equipment: PoolCop
Model name: PoolCop Evolution
The Product was built to fulfil the following:
EMI/RF requirements as described in the standards NF EN 55022 (March 2007) +A1 (May 2008) and NF EN 55024 (March 2011)
Emission:
Conducted emission: 150 KHz – 30 MHz, NF EN 55022
-
Radiated emission: 30 MHz – 1 GHz, NF EN 55022
-
Harmonics emissions: 0 KHz – 2 KHz, NF EN 61000-3-2 compliant without tests
-
Flickers: 0 KHz – 2 KHz, NF EN 61000-3-3 compliant without tests
-
Immunity:
Electrostatic discharge: NF EN 61000-4-2
-
Radiated immunity: NF EN 61000-4-3
-
Magnetic field (50Hz and 60 Hz) immunity: NF EN 61000-4-8 Not applicable
-
Burst on power supply: NF EN 61000-4-4
-
Surge on power supply: NF EN 61000-4-5
-
Radio frequency on power supply: NF EN 61000-4-6
-
Voltage dips on power supply: NF EN 61000-4-11
-
Electric safety requirements as described in the standard NF EN 60950 (September 2006) +A1 (Avril 2013)
1.3 I I
MPORTANT NFORMATION
Your PoolCop is a product of superior design, engineering and manufacture and should be treated with care. The information
contained in this section will help you fulfil the warranty obligations and enjoy this product for many years.
Nor m s a nd connexions
Always respect all norms for electrical, hydraulic, chemical and swimming pool installation and operation. No responsibility will be
accepted for installation or use of this product outside the norms.
For the swimming pool to remain a place of pleasure and user-friendliness, it is necessary to take care of the safety of those who
bathe and of the installation standards.
The electric standard applicable is NFC15-100. It is obligatory that your installation adheres to the criteria of this standard.
When installing the device, the installer must ensure that the circuitry is protected by a 30mA differential circuit breaker. He must
also ensure a bipolar external mean to remove electrical power to the device so that maintenance operations can be safely
performed.
The electric connections must be carried out, according to the applicable norms, by a qualified installer who will:
Verify that the PoolCop and components are securely installed.
Verify that the PoolCop and components are correctly earthed.
Verify that the PoolCop is protected by a differential circuit breaker.
Verify the safety of the installation and that all cabling and piping is in good condition and free from damage.
Verify that any auxiliary equipment is correctly installed as per the manufacturer's instructions, and is compatible with the
PoolCop and installation.
www.poolcop.com
C CE
ONFORMITY
, S N
AFETY
Read the security instructions attentively before any use.
Instructions given below are all important for your safety.
P
OTICES AND RECAUTIONS
WARNING:
P a g e | 7
PCFR