Electrical Power Failure - PoolCop Evolution Installer And User Manual

P o o l C o p M a n u a l : V 4 2 E N
Elect r ica l Pow er F a ilur e
Your PoolCop will automatically detect a mains power supply failure and revert to the safe and low power mode, powered by the
backup battery.
Main AC Power Fails or is Disconnected
All functions will be de-activated automatically.
The valve will rotate to the safe position; this critical security function ensures that the valve will always rotate to a safe
position to avoid the possibility of flooding the pump house or draining the pool, even in the event of power failure during
valve rotation.
The display on the Valve Data Unit will indicate a power failure.
The "Power on" LED on the Control Connection Unit will extinguish.
The "Battery on" LED remains illuminated to indicate that the battery is functioning.
The message "AC Power Failure; PoolCop Deactivated" is displayed.
Main AC Power is Restored Within 5 minutes
Your PoolCop will immediately reactivate all the functions and timers.
All parameters will be restored, and no reprogramming of your PoolCop is required.
Main AC Power is Not Restored Within 5 minutes
Your PoolCop will power down completely.
The display screens will go blank, but no settings will be lost.
When your PoolCop detects that the main AC power supply has been restored:
Your PoolCop will power up and reactivate all the functions and timers.
All settings are restored, and no reprogramming of your PoolCop is required.
The saved history of Clean Filter cycles and Pool Refill are reset to zero.
www.poolcop.com
P a g e | 7 5
PCFR