Water Treatment; Auxilairy Control - PoolCop Evolution Installer And User Manual

P o o l C o p M a n u a l : V 4 2 E N
Start the pump.
Closely monitor water level, closing skimmers and
suction points as required.
Stop the pump when desired water level is attained.
With filter type Cleaning: AUTO, it is recommended to use cleaning cycles in Manual Control to reduce
Wa t er T r ea t m ent
See 3.5 Water Treatment
Auxi la ir y Contr o l
Auxiliaries have one cycle in every 24 hour period.
Auxiliaries can be set to slave mode i.e. to run only when the filtration runs (with the valve position Filter or Bypass). It is
recommended to use the slave mode for any auxiliary that depends on filtration flow rate (such as heating, cleaners, water
treatment, etc.). See 5.3 Auxiliaries Menu. Auxiliaries can be set to run on certain day(s) of the week. This is done by choosing days
ON and days OFF within the week.
Setting any timer to 00:00-00:00 (or any combination with same start and stop times) deactivates that timer.
Whenever quitting the AUXILIARIES
as required to match programmed running times.
Switch Auxiliaries ON/OFF
Navigate to MANUAL
Scroll UP or DOWN to place cursor at
Press SELECT.
Scroll UP and DOWN: place cursor at the desired
Auxiliary.
Press SELECT: the auxiliary will switch ON or OFF
www.poolcop.com
water level to economize water consumption.
menu, PoolCop checks and adjust the status of the auxiliaries, and switches them ON or OFF
CONTROL.
AUXILIARIES.
Not defined Auxiliaries cannot be switched ON/OFF.
To set auxiliary name, see 5.3 Auxiliaries Menu
S I N G L E S P E E D P U M P
> Pump
Speed
Valve
Pressure
S E L E C T
NOTE:
M A N U A L
Pump
> Auxiliaries
Check Level
Clean Filter
Valve Rotation
Equipment
S E L E C T
A U X I L I A R I E S
> 01 Pool Light
02 Pool Heating
03 Pool Cleaner
04 Garden 1
05 Available
06 Available
S E L E C T
NOTE:
P a g e | 7 1
: ON
: ---
: Waste
: 0.98 Bar
:
Q U I T
C O N T R O L
Q U I T
ON
OFF
OFF
OFF
OFF
OFF
Q U I T
PCFR