Filtration And Pump Control - PoolCop Evolution Installer And User Manual

P a g e | 6 2
Filt r a t ion a nd P u m p Contr ol
Switch the Pump ON/OFF
4.4.4.1.1 Start the Pump
Normally, the filtration pump is controlled automatically by PoolCop using filtration in manual timer or automatic modes. If,
however you want to run the pump at another time, or need to restart the pump after stopping it for any reason, this is done from
MANUAL CONTROL.
From the main POOLCOP display screen:
Press MENU.
❑
Press SELECT (MANUAL CONTROL
❑
Press SELECT (PUMP
Verify FILTER position is displayed.
Press SELECT (PUMP
Press SELECT; PUMP: ON
Press SELECT; the pump will run in the indicated valve
position.
Once the pump starts system pressure increases and
this will be displayed.
www.poolcop.com
is preselected).
is preselected).
is preselected).
will display.
If the valve is in position Waste, Backwash or Rinse, pool water level will reduce.
If the valve is Closed, pump will not be allowed to start
P o o l C o p M a n u a l : V 4 2 E N
P O O L C O P
> Manual Control
Filtration Modes
Auxiliaries
Water and Treatment
Maintenance
Configuration
S E L E C T
M A N U A L
> Pump
Auxiliaries
Adjust Level
Clean Filter
Valve Rotation
Equipment
S E L E C T
S I N G L E S P E E D P U M P
> Pump
Speed
Valve
Pressure
S E L E C T
CAUTION:
NOTE:
M E N U
Q U I T
C O N T R O L
Q U I T
: OFF
: ---
: Filter
: 0.00 Bar
Q U I T
PCFR